FoxelVox 2 Report post Posted December 7, 2017 Hi Community, I just finished up my blesta template and want to enable the proxmox module. But when i try to add a product, it doesn't show available/assigned nodes... These are my settings: https://prnt.sc/hkdkue https://prnt.sc/hkdl62 http://prntscr.com/hkdn5x Quote Share this post Link to post Share on other sites
Paul 4,899 Report post Posted December 7, 2017 Chances are pretty good Blesta is unable to connect to your Proxmox server. Make sure TCP port 8006 egress is open on your Blesta server so it can make an outgoing connection, and that the same port is open ingress on your Proxmox server Quote Share this post Link to post Share on other sites
FoxelVox 2 Report post Posted December 8, 2017 13 hours ago, Paul said: Chances are pretty good Blesta is unable to connect to your Proxmox server. Make sure TCP port 8006 egress is open on your Blesta server so it can make an outgoing connection, and that the same port is open ingress on your Proxmox server Hi paul, thanks for your response. I'm sure everything is open since firewall options are all open, and tcp+udp+http+https port 8006 is reachable when i run a test application. I installed a different module now, but it gives me this error: Internal API When Creating The VM on the node Also nothing appears in the logs, only that it gets the last used VM id and outputs status ok, but doesn't give api calls back while it can connect since it can find the iso storage and such1 Quote Share this post Link to post Share on other sites
MrRenegade 0 Report post Posted November 9 Has anyone come across a solution for this because I'm having the same issue. Zero nodes show available in the Package tool for Proxmox. I have ZERO firewalls between the Blesta server and the Proxmox server so I don't know what else it needs in order to work. Any help would be great. Quote Share this post Link to post Share on other sites
MrRenegade 0 Report post Posted November 10 Well... I feel dumb.. In case anyone comes across this same exact problem... you need to do username@pve or username@pam depending on the user account you used. Then inside of Proxmox if your not using the root account (highly recommend NOT using root) then you'll need to create a user (recommend using username@pve) and then assign permissions to the user account. Then if you have all the information entered into the module then it works just fine. Why do I feel like I'm the one answering my own questions all the time? 🤨 Quote Share this post Link to post Share on other sites